MasterForce 241-0415 Instrukcja Operatora Pobierz pdf (Strona 8)

Page 7

12. Be prepared for a reaction torque when

“seating” or removing a fastener. The tool

housing may tend to twist in the opposite

direction of bit rotation when “seating” or

removing a fastener, depending on the

torque setting of the tool.

13. Do not use dull or damaged impact

sockets and accessories. When installing

an accessory, insert the impact socket

well onto the output drive. Be sure that the

output drive has locked onto the socket

correctly.

14. Do not run the tool while carrying it

at your side. A spinning bit could become

entangled with clothing and injury may

result.

15. Place the tool onto the fastener only

when the tool is switched off. Rotating

wrench tools can slide off the fastener.

16. Be careful when driving long screws.

There is a risk of wrench sliding off the

fastener head, depending on the type of

socket or bit used. First test the run-down

of a fastener and pay attention during the

screw driving process to ensure you do not

injure yourself if the tool bit or socket slides

off of the fastener.

SAFETY INSTRUCTIONS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Komentarze do niniejszej Instrukcji

Brak uwag