When servicing, use only identical replacement parts.
Avoid cutting nails and staples when operating with the wood blade.
Inspect the workpiece carefully and remove all nails and staples before
operation.
Make sure that the blade always extends beyond the shoe and the
workpiece throughout the stroke. Blades may shatter if they strike the
workpiece or shoe.
Do not cut an oversized workpiece.
Check for proper clearance beyond the workpiece before cutting, so that
the blade will not strike the floor, workbench, etc.
Make sure that the blade is not contacting the workpiece before the
switch is turned on.
Keep the saw blades clean and sharp.
Use only correct blades. Always use blades recommended for the type of
workpiece.
Do not leave the tool running. Operate the tool only when hand-held.
Always release the switch to “OFF” and wait for the tool to come to a
complete stop before removing the blade from the workpiece.
Keep the handle dry, clean, and free from oil and grease. Always use a
clean cloth when cleaning. Do not use solvents, brake fluids, gasoline or
other petroleum products to clean the tool; they may damage plastic parts.
Do not operate this tool in a gaseous or explosive environment or near
explosive materials.
Never force the tool. Apply firm pressure against the saw’s pivot shoe for
the sawing operation--too little or too much pressure could cause jumping
or vibration and may break the blade.
Never operate the saw without the pivot shoe in position. The spindle may
strike against the workpiece and damage the reciprocating mechanism.
Do not touch the blade or the workpiece immediately after the sawing
operation. They may be extremely hot and could burn your skin.
Hold the tool firmly with two hands when operating the tool.
Do not reach underneath the workpiece. The proximity of the blade to your
hand is hidden from your sight.
DESCRIPTION
KNOW YOUR RECIPROCATING SAW (Fig. 1)
Before attempting to use this reciprocating saw, familiarize yourself with all
of its operating features and safety requirements.
WARNING: The safe use of this product requires an understanding of the
information on the tool and in this operator’s manual, as well as knowledge of
the project you are attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
TOOL-LESS BLADE CHANGE SYSTEM
The saw has a blade clamp design that does not require the use of a tool
(blade wrench) when installing or removing the blade.
VARIABLE-SPEED TRIGGER SWITCH
The variable-speed trigger switch delivers higher speed with increased
trigger pressure and lower speed with decreased trigger pressure.
PIVOT SHOE
The shoe pivots to provide maximum control against the surface being cut.
LED WORKLIGHT
The LED worklight illuminates the cutting area.
Pivot shoe
Tool-less Blade clamp
LED worklight
Blade-clamp
release lever
Lock-on button
Orbital-action lever
Shoe-adjustment screw
Variable-speed
trigger switch
Fig. 1
(28 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji